Specifications & technical data data for the John Deere 2940 tractor can be found on this page.
The John Deere 2940 Tractor is equipped with a 359 ci [5.9 L] liquid-cooled 6-cylinder John Deere diesel engine, delivering 50.7 kW [68 hp] tractive power at 2,500 nominal rpm.
John Deere 2940 Tractor Featured with a John Deere 5.9L 6 Cylinder Diesel Engine, 4 × 2 Drive, Power Steering, 2400 lbs [1088 kg] Rear Lift (at 24 ″ / 610 mm), 16 Forward and 8 Gearsback and 9435 to 10650 lbs.
John Deere 2940 Specs.
John Deere 2940 Engine:
engine
John Deere diesel 6-cylinder liquid-cooled 359 ci [5.9 L]
Bore/Stroke:
4.19×4.33 inches [106 x 110 mm]
Compression:
16.8:1
Rated RPM:
2500
Starter volts:
12
Coolant capacity:
20 qts [18.9 L]
John Deere 2940 3 Point Hitch
Rear Type:
II
Control:
position control and lower-link draft sensing
Rear lift (at 24″/610mm):
2400 lbs [1088 kg]
John Deere 2940 Power
Drawbar (claimed):
68 hp [50.7 kW]
PTO (claimed):
82 hp [61.1 kW]
Drawbar (tested):
64.18 hp [47.9 kW]
PTO (tested):
81.17 hp [60.5 kW]
John Deere 2940 Mechanical
Chassis:
4×2 2WD
4×4 MFWD 4WD
Final drives:
planetary
Differential lock:
mechanical rear
Steering:
power
Brakes:
differential hydraulic wet disc
Cab:
Open operator station. Sound-Gard Cab optional.
John Deere 2940 Transmission
Transmission:
John Deere TSS High-Low
Type:
partial power shift
Gears:
16 forward and 8 reverse
John Deere 2940 Hydraulics
Type:
closed center
Pressure:
2250 psi [155.1 bar]
Valves:
2
Pump flow:
23 gpm [87.1 lpm]
John Deere 2940 PTO
Rear PTO:
independent
Rear RPM:
540/1000
John Deere 2940 Dimensions
Weight (operating):
9435 lbs [4279 kg] (4WD ROPS)
Weight (ballasted):
10650 lbs [4830 kg]
Wheelbase:
101.6 inches [258 cm]
Length:
164.9 inches [418 cm]
Width:
90.3 inches [229 cm]
Height (hood):
67.1 inches [170 cm]
Height (exhaust):
113 inches [287 cm]
Clearance (front axle):
25.6 inches [65 cm]
Rear axle:
Rack-and-pinion
Front tread:
57 to 82.4 inches [144 to 209 cm] 63 to 94 inches (wide front) [160 to 238 cm] (wide front)
